Hogfors Ball valves offer very good shut-off capabilities. A simple quarter-turn (90°) completely opens or closes the valve. They are available in a wide range of body, seat and seal materials, suitable for a many different applications.

Ball valves also have a straight uninterrupted flow path which minimizes the pressure drop across the valve most notably in the full bore versions where the port through the ball has the same as the diameter of the pipe.

The Flow Control Group supply a range of ball valves, including flanged and 3-piece cast steel ball valves and the Högfors weld construction ball valves which are designed for applications in district heating and cooling schemes. These ball valves can be supplied with flanged, butt weld and threaded connections.

Hogfors Balancing valves are designed for on/off and control of liquid flows in heating and cooling systems. The valve is equipped with 2 test points in order to measure the pressure difference across the valve; the required flow rate can then be set by turning the lever to the correct position as indicated on a scale on the valve.

The Högfors balancing valve is supplied with a double regulating device which allows the valve to be closed but then returned to the same part open position when required.

The Hogfors Series 38500 Strainer is used in industrial and district heating pipelines for collecting dirt and impurities. Available in  PN16, PN25, PN40 (subject to size), DN 15 – 150, operating at Media Temp. -20°C +200°C. Connection to pipeline: weld ends for EN10216-2 and EN10217 steel tubes.